Wilwood Pad Shim kit SL Style Pads - 300-8460

Wilwood’s Pad Shim Kits feature a steel and elastomeric construction that dampens vibration transmitted between the rotor and pad. This is an industry standard to reduce NVH (Noise, Vibration and...

Wilwood Pad Wear Plate - DL/DLS - 300-5875

Caliper wear plates are used to prevent pad “dig-in” and wear on aluminum bodies. Manufactured form stainless steel alloy for maximum abrasion resistance. This specific part number is used for Billet...

Wilwood Stop Light Pressure Switch 1/8-27 Male 60-100 PSI - 300-11181

Stop Light Pressure Switch, dual pole with a 1/8th pipe male inlet. Circuit turns on at 60-100 psi. Used in part #260-11179 Combination Proportioning Valve assembly. Plated steel construction.

Wilwood Valve Line Shut-off Solenoid Activated - 260-9921

This valve can be used as a brake shut-off. When energized, the valve will block pressure from reaching downstream. The valve does not prevent fluid from returning to the master cylinder. This...

Wilwood Residual Pressure Valve - New Style w/ Fittings - 2# / Blue - 260-13783

Wilwood's two, four and ten pound residual pressure valves retain a minimum brake line pressure to help eliminate excessive pedal travel in both disc and drum brake systems. The two pound valve is...

Wilwood Bracket (ea) - Forged Dynalite to Honda/Acura - 262 mm Rotor - 250-6289

Wilwood’s Lug Mount Front Bracket kits mounts Lug mount calipers with 5.25” center to center mount used in various Wilwood calipers. Mounts are application (vehicle) specific and contain 3/8-24...

Wilwood Bolt-Balance Bar - 3/8-24x4.88 LG w/Groove - 230-12749

Wilwood’s Balance Bar Bolts are manufactured from high strength alloy steel with a zinc plated anti-corrosion finish.

Wilwood Bolt Kit - Adapter/Rotor 5/16-18 x 1.00-BHCS Torx - 16 pack - 230-12177

Wilwood’s Rotor Bolt kits contain bolts and hardware for mounting rotors specific hat or adapters.

Wilwood DL Caliper Mount Bolt Kit- 4 pk. - 230-11861

Wilwood’s Caliper Mount Bolt kits contain various bolts and hardware for bracket mounting for specific vehicle applications.

Wilwood Bolt Kit - Rear Drag Rotor to Hat 8 pk. - 230-0233D

Wilwood’s Rotor Bolt kits contain bolts and hardware for mounting rotors specific hat or adapters.

Wilwood Inlet Fitting - 1/8-27 NPT to -3 (Straight) - 220-6956

Wilwood Inlet Fitting - 1/8-27 NPT to -3 (Straight)

Wilwood Fitting Adaptor -3 to 10mm x 1.0 I.F. - 220-6413

FITTING,ADAPTER,TUBING,-3 TO M10x1.0 IF STEEL,ZINC