COMP Cams Comp Break-In Oil 12Qt Case - 1590-12

Improves surface mating of rotating assembly, rod journals, piston rings, valve guides, cam and lifters, etc.; Protects all internal engine components, including flat tappet and roller valve trains; Proprietary additive package includes optimum amounts...

Red Line Lead Substitute - 12oz. - 60202

Red Line Lead Substitute 12oz. - Case of 12

Red Line SI-1 Fuel System Cleaner - 15oz. - 60103

Red Line SI-1 Fuel System Cleaner 15oz. - Case of 12

LIQUI MOLY 500mL Pro-Line Engine Flush - 2037

One 500 ml can is sufficient for up to 5 liters(1.3 gal.) of oil. Add Pro-Line Engine Flush to the engine oil at operating temperature before changing the oil. After adding the product allow the engine to idle for 10 to 15 minutes depending on the degree...

LIQUI MOLY 500mL Truck Series Complete Diesel System Cleaner - 20252

To be added directly into the fuel tank. Use aspreventive or to cure acute engine problems. The product mixes with the fuel automatically. Minimum fuel filling of 25 liters (7 gal.) is requested for optimum product performance. Contents of Can sufficient...

LIQUI MOLY 300mL MoS2 Anti-Friction Engine Treatment - 2009

MoS2 Anti-Friction Engine Treatment ensures immediate friction and wear reduction, adds an extremely protective and pressure-resistant boundary layer with low friction and lubricates during cold starts to prevent damage from lack of oil. Contributes to...

LIQUI MOLY DIJectron Additive - Gasoline Direct Injection (GDI) Cleaner - 22076

The unique combination of proven PEA technology and the latest additive generation achieves maximum cleaning performance in the combustion chamber, in and around the injector tip and in the entire fuel system. Furthermore, DIJectron stops the formation...

LIQUI MOLY Pro-Line Turbocharger Additive - 22074

Provides initial lubrication of new or replaced turbochargers to prevent damage due to oil starvation. Damage to turbocharger may occur within seconds of engine start if not lubricated properly. Pro-Line Turbocharger additive will provide needed...

LIQUI MOLY 300mL Radiator Cleaner - 2051

Add contents to the cooling water. Turn the heating to maximum and let the engine run on idle for 10 - 30 minutes depending on the degree of contamination. Drain the coolant and flush the cooling system with water. Fill the cooling system according to...

LIQUI MOLY 500mL Pro-Line Fuel Injection Cleaner - 2030

To be added directly into the fuel tank. As a preventive measure, add during each inspection, after repairs on the fuel system and after each Jet-Clean cleaning operation. The product mixes with the fuel automatically. Minimum fuel filling of 25 liters...

LIQUI MOLY 500mL Truck Series Oil Treatment - 20256

Ensures immediate friction and wear reduction, adds an extremely protective and pressure-resistant boundary layer with low friction and lubricates during cold starts to prevent damage from lack of oil. Contributes to lower fuel consumption, longer engine...

LIQUI MOLY 400mL Pro-Line Diesel Intake System Cleaner (Aerosol) - 20208

To prepare, attach tube with nozzle. To gain access, remove hose or pipe immediately before throttle housing. The engine needs to run to perform cleaning. If unable to start engine, disconnect air mass sensor connector while the ignition switch is in off...